Objects

2420 results found. Records searched: 2420

1. 83.23.110a&b - Buggy Steps

   Black painted. Flat where the step is fastened to the buggy with three round holes then curves downward for the step. The design on the step is a series of slant lines going toward the center to a rectangular box with a line in the center.

   Record Type: Object

   
2. 83.23.111 a&b - Buggy Steps

   "T" shape flat piece where the step is fastened to the buggy. It curves downward to a square buggy step which has the design of "Y"s pointed in different directions.

   Record Type: Object

   
3. 83.23.112 a&b - Buggy Steps

   "T" shape flat piece where teh step is fastened to the buggy. It curved downward to a square buggy step which has the design of square dots that make a four leaf type clover design, once painted black.

   Record Type: Object

   
4. 83.23.113 a&b - Buggy Steps

   Painted gold. A flat piece with 2 holes for fastening to the buggy. Then moving downward there is another piece attached to the center that curves upward and also attached to the buggy. On the other end there is the square step with the design of horizontal lines across the step from one end to the other.

   Record Type: Object

   
5. 83.23.114 a&b - Buggy Steps

   A thick short flat part with 2 holes for screws. The screws are joined together by a thin curved iron piece this flat thick is curved upward to the short square buggy step. The design is 3 sections of horizontal lines are 2 sets of undulated holes; shaped in slants. Looks as if it was painted red once.

   Record Type: Object

   
6. 83.23.115a&b - Buggy Steps

   A flat "T" square with four holes. Moving downward towards the step, the middle section is squared & indention in the lock looks as though it has been dug out. Next is the foot step that has the design of "X"s.

   Record Type: Object

   
7. 83.23.116 a&b - Buggy Steps

   Small flat "T" shaped part used to fastened to buggy. Moving downward to the oval foot step. The foot step design is a series of triangles formed into circle with a diamond shape in center.

   Record Type: Object

   
8. 83.23.117a&b - Buggy Steps

   A "T" square with maybe 3 holes where the step fastened to the buggy. More downward to the foot step. The design is 4 lines making 5 sections of dots. Once painted black.

   Record Type: Object

   
9. 83.23.118 - Buggy Steps

   A flat step with a horizontal design curving up to a small section that has two holes with screws and nuts. Attached to the bottom leading upward (curving) to a round part, where the screw fastened to the buggy.

   Record Type: Object

   
10. 83.23.119 - Buggy Steps

    A square foot with a design of 2 rectangular blocks in the center with a screw in the middle. Moving upward the pieces spiral out to 3 different pieces each has a hole for a screw to fasten to the buggy.

    Record Type: Object

    
11. 83.23.120 - Buggy Steps

    A "T" shaped base with three holes for fastening to the buggy moving downward it curves to the foot step. The design on the foot stool is dots with two bare sections. In the two bare sections there is a design of five dots in the center.

    Record Type: Object

    
12. 83.23.121 - Buggy Steps

    A black foot step with horizontal lines. Moving upward there is a flat section with 2 screw holes. Attached to the base of this is another section that curves up past the first section. There is a round piece that has a screw hole. once painted black.

    Record Type: Object

    
13. 83.23.122 - Buggy Steps

    A step with the design of square holes that look round. Attached is a thin rectangular piece that curves up like a snake with two holes in it for fastening on the side.

    Record Type: Object

    
14. 83.23.123 - Buggy Steps

    A rounded step that looks like a crown. The design is four lines with 5 sections, or holes with a rectangular piece on the back with 6 holes and 5 lines to each side there is a piece of iron shaped like the letter "b" only the top part is flat for fastening to the buggy. Once painted red.

    Record Type: Object

    
15. 83.23.165 - Bed Cord Tightener

    Bed Wrench A "T" shaped object made of wood. The handles are run through the center of the rounded piece. At the bottom of the rounded peice is 2 almost flat sections made by carving the center piece out. The insides are flat. The outer sides are rounded.

    Record Type: Object

    
16. 83.23.178 a&b - Hinge

    A long flat piece of iron with hole which contain screws & nuts. The nuts have ends that curl up into little circles. On one of the long flat piece is a loop for putting a bolt through.

    Record Type: Object

    
17. 83.23.179 - Wagon Yoke

    A long thin but thick in the middle piece of wood with three holes on each end. In the middle there is a flat piece of iron wrapped around the middle of the wood with a hook on the end. To each side of this is a chain that has been nailed in at the end of this chain is a short piece of iron.

    Record Type: Object

    
18. 83.23.200 - Blacksmith Stand

    A one piece long rounded with a sharp point on one end moving upward; there is a square hole. Moving upward the pole splits to a two prong pointed fork.

    Record Type: Object

    
19. 83.23.201 - Blacksmith Stand

    A very long rouned handle with a sharp point on one end on the other end an extra piece has been added. This extra piece connected to the pole is in the shape of a "V".

    Record Type: Object

    
20. 83.23.213 - Hay Cutter

    A wide "V" shaped blade held by two curved pieces of iron. This iron is in the shape of a heart. Moving upward is an "L" shaped square tool that has been added, up from this is a long thin rod. That makes the handle by separating again and making a horizontal loop.

    Record Type: Object